Click here to return to our home page

 

Requires a Java Enabled Browser.

 
 

 

WARNŽ LIGHT BAR FOR THE H2 HUMMERŽ
Now there's an easy way to get the competitive fire of WARN Lights on an H2. The WARN Light Bar for the H2 Hummer bolts to the factory grille guard, and will mount up to four lights, including WARN H.I.D. and SDB-210 Driving/Spot Lights. The textured black powder coated finish seamlessly matches the factory grille guard finish.

9.5ti MULTI-MOUNT FOR THE H2 HUMMERŽ
Re-designed to fit the H2 Hummer's front and rear receiver, the new 9.5ti Multi-Mount for the H2 packs 9500 lbs of portable pulling capacity into a massive 12.5 lb aluminum die-cast body. The new shape not only looks great, but sheds the elements like no other winch on the market: seals at the key points give extreme-duty water resistance. A Gen II Bosch motor delivers just the right balance between torque and speed. Plus another Warn Industries first - operator feedback - the thermometric indicator gives the operator information about motor temperature during the winching operation.
9.5ti MULTI-MOUNT SPECS/PART NUMBERS
Rated Line Pull: 9500 lbs. (4310 kgs) single-line
Motor: Gen II, Series WoundTM
Remote Control: Remote switch, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear Ratio: 156:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
Weight: 112 lbs. (51 kgs.)
Wire Rope: 125', 5/16" diameter (30m, 8mm diam.)
Fairlead: Hawse
Recommended Battery: 650 CCA minimum for winching
Battery Leads: Front heavy-duty 7.5'/2.2m with quick connect plug
Finish: Chromate with High-gloss Powder Coat

12V DC PERFORMANCE SPECS
Line Pull
Lbs.(Kgs.)		 Line Speed
FT./min(M/min.)		 Motor
Current		 Pull by layer
layer/Lbs(Kgs.)
0 62(18.9) 47 amps 1/9500(4313)
2000(910) 16.3(4.97) 160 amps 2/8650(3927)
4000(1810) 11.8(3.60) 230 amps 3/7920(3595)
6000(2720) 9.31(2.84) 305 amps 4/7400(3359)
8000(3630) 7.59(2.31) 370 amps 5/6940(3150)
9500(4310) 6.67(2.03) 425 amps

 
Above performance specs are based on first layer of drum